When the equipment stops, the clock starts.
Aiventic matches each call to similar repairs on the same machine, so your tech knows the likely fault, the next test, and the part to bring before they reach the site.

“Can’t hold system pressure at full demand.”
→ A sticking inlet valve or a clogged inlet filter. Check the filter differential before you look for leaks downstream.
What makes it hard. The work commercial equipment teams do every day.
01
Every hour down is expensive
A failed compressor or process pump can stop a whole site. Your customer counts the minutes.
02
Long-tail equipment
Some machines come up once a year. The tech who fixed it last time may be in another region, or retired.
03
Diagnostics take the longest
The repair is often quick. Working out what to repair is where the hours go.
Already solved. Repairs your history probably holds the answer to.
- Ingersoll Rand R-Series 55 compressorseen 34×
“Can’t hold system pressure at full demand.”
→ A sticking inlet valve or a clogged inlet filter. Check the filter differential before you look for leaks downstream.
- Atlas Copco GA 37 compressorseen 41×
“Trips on high discharge temperature on hot afternoons.”
→ Clogged oil cooler and a sticking thermostatic valve. Clean the cooler, then check the valve.
- Grundfos CR 32 booster pumpseen 29×
“Loses prime and cavitates after a shutdown.”
→ A leaking foot valve or an air leak on the suction side. Pressure-test the suction line before replacing the seal.
Example repairs. Counts are illustrative.
Equipment we see
- Atlas Copco
- Ingersoll Rand
- Sullair
- Quincy
- Grundfos
- Chillers
- Speed Queen
- Rooftop units
Where to start. Workflows commercial equipment teams use first.
- Diagnostic GuidanceRanked likely causes with the evidence, and the next check to makeLearn more
- Similar Repair IntelligenceSee every time you’ve fixed this model and symptom, and what heldLearn more
- Improve ProductivityLess time diagnosing and documenting, more jobs finished per dayLearn more
- Service HistoryEvery visit, part, and outcome on a unit, in one place across systemsLearn more
Questions. Straight answers.
What if we’ve only seen a machine a few times?
Aiventic uses what you have, then adds manuals, bulletins, and repairs on similar equipment. It tells you how much evidence sits behind each answer.
Does it replace our service manuals?
No. It reads them alongside your job history, so the tech gets the manual page that matters plus how the problem was actually fixed.
Does it work across regions?
Yes. A repair closed in one branch becomes experience for every tech in every branch.
Stop solving the same repair for the first time.
Bring a few hundred closed jobs. We’ll show you what your company already knows.